Owens Corning Insulation Removal & Replacement in Round Rock: What to Know First
We provide independent Owens Corning insulation removal and replacement in Round Rock, with most jobs completed in one day and a written price delivered before any work starts. Most attic insulation removals in Round Rock homes run between $1,800 and $4,200 depending on contamination level, access difficulty, and whether the existing material is Owens Corning PINK Fiberglas, ProCat, or an older loose-fill system. Call us at (737) 259-7528 for a free estimate with a written scope and warranty included.
This page is for Round Rock homeowners who need to remove and replace Owens Corning insulation - whether it’s compressed, contaminated by rodents or moisture, or part of a larger envelope upgrade. We work with Owens Corning materials daily, but we are an independent service provider, not affiliated with or authorized by Owens Corning.
How Owens Corning Products Fail - and How We Fix Them
- Owens Corning PINK Fiberglas batts settling below labeled R-value. In Round Rock’s heat-cycling climate, batts installed in the 2005-2015 building boom have often compressed from R-30 to an effective R-19 or lower. We remove the settled material, air-seal the attic floor at top plates and can-light penetrations, then replace with fresh blown-in or new batts at full thickness.
- ProCat loose-fill developing thermal drift in vented attics. Owens Corning’s ProCat system performs well when installed to depth, but wind washing through soffit vents redistributes the material toward the eaves. We find bare spots over the center of the house, remove the drifted insulation, install proper baffles, then redistribute or replace with new ProCat or an alternative.
- Older Owens Corning AttiCat blown-in contaminated by roof leaks. The pink color makes water staining obvious, but the real problem is the compressed, matted clusters that trap moisture against drywall. We remove the damaged material, inspect for active leaks, document with photos, then replace only after the roof repair is verified.
- Pre-2010 Owens Corning formaldehyde-bound batts off-gassing in sealed attics. These older batts were never designed for unvented assemblies. In Round Rock’s newer sealed-attic conversions, we remove the incompatible material and replace with Owens Corning EcoTouch or an equivalent un-faced product that won’t degrade indoor air quality.
- Vermiculite insulation misidentified as Owens Corning product. Some Round Rock homes built 1940-1980 have vermiculite beneath later Owens Corning additions. We test for asbestos before disturbing anything, handle removal under proper abatement protocol if positive, then install new insulation with full documentation for resale disclosure.
Our Owens Corning Insulation Removal & Replacement Process
- 1
Site assessment and blower-door test. We pressurize the house to measure CFM50 leakage, then inspect the attic with the homeowner present or via documented photos. You get the starting number in writing.
- 2
Written price and scope under Haven Standard Clause 1. Flat price, written warranty, and documented photo record - delivered before anyone lifts a tool. No exceptions.
- 3
Containment and removal. We isolate the attic hatch, run negative air if contamination is present, and remove the Owens Corning material by type: batts are bagged intact, loose-fill is vacuumed with HEPA filtration.
- 4
Air sealing of the attic floor. Top plates, wire and pipe penetrations, can lights, and chimney chases get sealed with fire-rated caulk, foam, or metal flashing as code requires. Seal the leaks first. The insulation has nowhere to go until you do.
- 5
Replacement installation and post-test. New Owens Corning, Reflectix, or another specified material goes in to the designed depth. We run a second blower-door test and publish the before-and-after numbers with your photo record.
- 6
Cleanup, documentation, and warranty delivery. The crew vacuums the work path, you receive the photo record, blower-door readings, and the 365-Day Done Right Promise in writing.
What Owens Corning Insulation Removal & Replacement Costs in Round Rock
| Scenario | Typical Range | What Moves the Price |
|---|---|---|
| Standard PINK Fiberglas batt removal and replacement (1,200-1,800 sq ft attic) | $1,800 - $3,200 | Access difficulty, joist spacing, whether air sealing is included |
| ProCat or loose-fill removal with redistribution or replacement | $2,400 - $4,200 | Depth of existing material, contamination level, baffle installation needed |
| Contaminated insulation removal (rodent, moisture, mold) | $3,000 - $5,500 | Hazmat handling, extent of damage, deck replacement if structural |
| Vermiculite testing and removal (if asbestos-positive) | $4,500 - $8,000+ | Lab turnaround, abatement crew, third-party clearance testing |
These are Round Rock market ranges based on jobs we’ve completed in neighborhoods from Behrens Ranch to Fern Bluff since 2016. Every job gets a written price before work starts - no estimate ranges that balloon later. Call (737) 259-7528 for your exact number; estimates are free.
Why Round Rock Homeowners Call Topside Attic Insulation Round Rock for Owens Corning Work
We’ve removed and replaced Owens Corning insulation in over 9,000 homes since 2016, and we publish the blower-door numbers to prove the air-sealing result. Wes Okafor and our crew know which Round Rock attic configurations - the shallow-pitch ranches in Old Town, the complex tray ceilings in Teravista - tend to hide bypasses that make fresh insulation perform like old insulation.
We source Owens Corning, Reflectix, Johns Manville, Knauf, Rockwool, and other brands with no proprietary lock-in, so the replacement material matches your actual performance goal, not a manufacturer’s quota. Every job carries the 365-Day Done Right Promise, a live person answers calls 24/7, and your documented photo record arrives before we leave the driveway.
FAQs
Owens Corning’s product warranty covers manufacturing defects, not installation or removal by an independent contractor. Our work does not void material warranties, but we are not affiliated with Owens Corning and cannot process manufacturer claims on your behalf. We document the original product label and install date when visible, so you retain any valid material warranty. Call (737) 259-7528 and we’ll review what documentation we can recover from your attic.
Most jobs finish in one day; contaminated or vermiculite removals may need two. We schedule arrival between 8 and 9 a.m. in Round Rock, and you’ll get a text when the crew is en route. The written scope includes a completion estimate before anyone starts. Call (737) 259-7528 for availability - we answer live, 24/7.
Repair is rarely practical with fiberglass insulation. Once batts are compressed, moisture-stained, or redistributed by wind washing, the fiber structure doesn’t rebound and the thermal performance is permanently degraded. We remove the compromised material, seal the attic floor, and install fresh product to the designed R-value. Call (737) 259-7528 for a free second opinion on any written estimate you’ve already received.
We can source current Owens Corning lines including PINK Fiberglas, ProCat, and EcoTouch. Discontinued formulations from the 1990s or 2000s are no longer manufactured; we match the thermal performance (R-value) and install to current code, not the original spec. If exact color matching matters for your records, we note the substitution in your written scope. Call (737) 259-7528 to discuss options.
Yes. Rodent contamination, active roof leaks, or sewage backup in an attic are health hazards, not scheduling inconveniences. We answer calls live 24/7, assess the contamination type, and schedule removal with appropriate containment - usually within 24-48 hours in Round Rock. The written price and scope still come before work starts, even on urgent jobs. Call (737) 259-7528.
Ready to remove old or failed Owens Corning insulation and start with a sealed, properly insulated attic? Call (737) 259-7528 for a free estimate with a written price, scope, and warranty - delivered before any work starts.
Written by Wes Okafor, Owner, Topside Attic Insulation Round Rock at Topside Attic Insulation Round Rock, serving Round Rock and nearby areas.